Solar Charge Controller 60A, Intelligent Battery Regulator for Solar Panel LCD Display with USB Port (60A)

This intelligent solar charge controller efficiently manages the operation of solar panels and batteries in a solar system. It helps protect and extend battery life by automatically turning off when the battery voltage drops below 8V (the LCD display will also turn off at this point).

Specifications:
Battery Voltage: DC 12V/24V Auto
Charge/Discharge Current: 60A
Over Discharge Protection: 10.7V/21.4V
Charge Recovery Voltage: 12.6V/25.2V
Overcharge Floating Charge: 13.7V/27.4V
Equalization: Sealed – 14.4V / Gel – 14.2V / Flood – 14.6V

Easy Operation and Installation:

Wiring Steps: Turn the adjustment screw counter-clockwise until the plates move down. Insert the wire into the opening between the plate and the top of the terminal hole (not under it). Tighten the screw clockwise to secure the wire firmly.

Important Notes:

1. Keep the controller in a cool and well-ventilated place to maintain proper heat dissipation.
   
2. This regulator is suitable only for lead-acid batteries (OPEN, AGM, GEL) and not for nickel hydride, lithium-ion, or other battery types.
   
3. Ensure the battery has enough voltage for the controller to recognize it before first installation.
   
4. Working temperature range: -35°C to 60°C. During hot sunny days, when temperatures may reach 60–75°C, ensure the controller remains in a cool and ventilated environment for stable performance.