AC 220V Digital Thermostat Controller Dual Temperature and Humidity Regulator Device with LCD Display & Smart Alarm

• Dual Temperature & Humidity Controller :- Digital 2 in 1 display thermostat that allow you to control and track temperature (-20 ° C ~ +80 ° C) and humidity (00%RHï½+100%RH) at same time means you can operate refrigeration/ heating and humidifier/dehumidifier equipment at the same time.
• Independent Control Modes :- Heating/Cooling function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity Control.
• Smart Alarm Function :- Alarm with function, thermostat will turn on the alarm in case of sensor failure. Long sensor wire of length 1m.
  
• User-Friendly & Versatile :- You can set maximum and minimum range of both temperature and humidity as per your requirement. This device is a perfect choice for use in green house, aquarium, wine cellar, incubator, where maintaining specific temperature and humidity is must.
• 1-Year Warranty & Dedicated Support :- For technical assistance or product support, reach out to us via WhatsApp, call, or email: 📞 980-970-9898 | ✉️ care@amicikart.com.
  
• Note: Follow the connection diagram while setting the device. In case LLL is displayed, you can troubleshoot the device by disconnecting the sensor and again connecting it. You can even calibrate the device as per the process mentioned in the manual.

Specifications:
Supply Voltage: AC110-220V
Relay output contact: 2200W
Temperature Range: -20°C ~ +80°C
Measuring humidity range: 00%RH?+100%RH
Accuracy: 1°C 0.1%RH
Size: 75mm*85mm*35mm

Temperature Setting:
Heating and Cooling Mode Setting:-
Press and hold first button for 3 seconds to start temperature (20?C default). Press and hold first button 3 seconds to stop temperature (30?C default), Use??button to set Stop Temperature value.
Humidity Setting:-
Press and hold other button for 3 seconds to start humidity (40%RH default).
Press and hold first button 3 seconds to stop humidity (60%RH default).
Use button to set Stop humidity value.