Your cart
Your cart is empty
Continue shopping
Know before you buy
-
Pick the right supply voltage
Order 12V DC, 24V DC or 220V AC to match the power you will connect. All three have the same features.
-
10A relay output
Keep the connected load within 10A on every variant.
-
-50°C to 99°C, ±1°C
Wide range for incubators, brewing and cold storage.
-
Heating or cooling mode
In heating mode the relay turns on below the set temperature; in cooling mode, above it.
Features that make it useful
-
Four programmable functions
F1 temperature set, F2 differential, F3 compressor delay, F4 calibration.
-
Over-temperature alarm
Alerts you when readings go past your set limit.
-
Compressor delay up to 1 minute
Helps protect compressors from short-cycling.
-
Many uses
Egg incubators, aquariums, wine fermenters, cold storage and HVAC setups.
-
1-year warranty
Support at 980-970-9898 or care@amicikart.com.
How to use
-
Choose your variant
12V DC for solar, automotive and low-voltage builds; 24V DC for industrial panels; 220V AC for household mains.
-
Switch off power before wiring
For the 220V AC version, switch off mains first and use an electrician if you are unsure. For DC versions, disconnect the supply.
-
Wire supply, sensor and load
Connect the supply, temperature sensor and load as shown on the controller's label. Keep the load within 10A.
-
Set F1 to F4
Set the target temperature, differential, compressor delay and calibration, then choose heating or cooling mode.
STC-1000 Thermostat 10A, 12V/24V DC or 220V AC
amiciKart · STC-1000 · 12V DC, 24V DC or 220V AC variants · 10A · heating and cooling · -50°C to 99°C · ±1°C
A digital temperature controller for incubators, fermenters, aquariums and refrigeration. It switches between heating mode and cooling mode, measures from -50°C to 99°C with ±1°C accuracy, and its 10A relay can drive most heaters, compre...
Sale price
Rs. 629.00
-75%
Regular price
Rs. 2,500.00
(MRP Inclusive of All Taxes)
Regular price
Rs. 629.00
Unit price
Increments of 1
Minimum of 1
Maximum of
Digital Thermostat STC-1000 Incubators, Dual Mode Heating & Cooling Temperature Controller Alarm & Delay Function(10A)
Sale price
Rs. 629.00
Regular price
Rs. 2,500.00
(MRP Inclusive of All Taxes)
Regular price
Rs. 629.00
Unit price
Superfast Shipping
Orders are processed before 2 PM on dispatch days.
5% OFF on all orders
Use code
10% OFF on new launch
Use code
10% OFF on purchase of ₹5000+
Use code
Couldn't load pickup availability
Specifications
| Brand | amiciKart |
|---|---|
| Model | STC-1000 |
| SKUs | 1xTC-STC-1000-12V (12V DC) · 1xTC-STC-1000-24V (24V DC) · 1xTC-STC-1000 (220V AC) |
| Supply voltage | 12V DC, 24V DC or 220V AC (by variant) |
| Relay rating | 10A (all variants) |
| Temperature range | -50°C to 99°C |
| Accuracy | ±1°C |
| Modes | Heating and cooling |
| Functions | F1 temp set, F2 differential, F3 compressor delay, F4 calibration |
| Compressor delay | Up to 1 minute |
| Alarm | Over-temperature |
| Warranty | 1 year |
Frequently asked questions
Which variant should I buy?
Match it to your power: 12V DC for solar or vehicle setups, 24V DC for industrial panels, and 220V AC for standard household mains.
Is the 10A rating the same on every variant?
Yes. All three share the same STC-1000 features and 10A output rating.
Can it heat and cool?
Yes. Set it to heating mode or cooling mode depending on what you are controlling.
What does the compressor delay do?
It waits up to 1 minute before restarting a compressor, which protects it from short-cycling.
Full Product Description
STC-1000 Thermostat 10A, 12V/24V DC or 220V AC
A digital temperature controller for incubators, fermenters, aquariums and refrigeration. It switches between heating mode and cooling mode, measures from -50°C to 99°C with ±1°C accuracy, and its 10A relay can drive most heaters, compressors, fans and pumps directly. It has an over-temperature alarm, compressor delay of up to 1 minute, and four settings (F1 to F4). Choose the 12V DC, 24V DC or 220V AC version to match your power supply. 1-year warranty.
- Four programmable functions: F1 temperature set, F2 differential, F3 compressor delay, F4 calibration.
- Over-temperature alarm: Alerts you when readings go past your set limit.
- Compressor delay up to 1 minute: Helps protect compressors from short-cycling.
- Many uses: Egg incubators, aquariums, wine fermenters, cold storage and HVAC setups.
- 1-year warranty: Support at 980-970-9898 or care@amicikart.com.
Important: The 220V AC version is wired into mains. Switch off the power before wiring and use an electrician if you are unsure.