7S–16S 200A Smart BMS for LiFePO4 Battery Pack | Bluetooth App + Display

Technical Specification:
Mobile App:- XJBMS (Not available on Play Store) Scan QR Code for app download Operating Current
Continuous Charge Current:- 200A
Continuous Discharge Current:- 200A
Charge Protection
Overcharge Protection Voltage:- 3.65V (Can be set)
Overcharge Protection Delay:- 1.0s (Can be set)
Discharge Protection
Over discharge Protection Voltage:- 2.8V (Can be set)
Over discharge Protection Delay:- 1.0s (Can be set)
Overall overcharge protection
Overall overcharge protection voltage (16S):- 58.4V (Can be set)
Overall overcharge protection delay:- 1.0s (Can be set)
Overall overcharge protection release voltage (16S):- 54.08V (Can be set)
Overall over discharge protection:-
Overall over discharge protection voltage (16S):- 44.8V (Can be set)
Overall over discharge protection delay:- 1.0s (Can be set)
Overall over discharge protection release voltage (16S):- 48V (Can be set)
Charging Overcurrent Protection
Charging overcurrent alarm current:- 205A (Can be set)
Charging overcurrent protection current:- 210A (Can be set)
Charge Overcurrent Delay:- 1.0s (Can be set)
Discharge Overcurrent 1 Protection:- 210A (Can be set)
Discharge Overcurrent 1 Delay:- 1s (Can be set)
Discharge Overcurrent 2 Protection:- 250A (Can be set)
Short Circuit Protection
Short circuit protection delay:- ＜300Us
Short Circuit Current:- 360A
Short circuit protection released:- After the load is removed, it will be automatically released
Equalization function:-
Balanced turn-on voltage:- 3.4V (Can be set)
Open pressure difference:- 30mV (Can be set)

MOS high temperature protection
MOS over temperature alarm temperature:- 90℃ (Can be set)
MOS over temperature protection temperature:- 115℃ (Can be set)
MOS protection release temperature:- 85℃ (Can be set)
Temperature Protection
Charge High Temp Protection:- 55℃ (Can be set)
Charge High Temp Release:- 50℃ (Can be set)
Charge Low Temp Protection:- -10℃ (Can be set)
Charge Low Temp Release:- -8℃ (Can be set)
Discharge High Temp Protection:- 60℃ (Can be set)
Discharge High Temp Release:- 55℃ (Can be set)
Discharge Low Temp Protection:- -20℃ (Can be set)
Discharge Low Temp Release:- -15℃ (Can be set)
Capacity default settings
Design capacity settings:- 200Ah (Can be set)
Full capacity setting:- 200Ah (Can be set)
Power Consumption
Operating Mode:- <40mA
Sleep Mode:- <200uA
In the Box list
Motherboard:- 1pcs
Constant current board:- 1pcs
Display:- 1pcs
Communication adapter board:- 1pcs
Positive wire:- Female banana head red soft silicone wire 260MM 1pcs
Sampling line A:- 1pcs
Sampling line B:- 1pcs
NTC line:- 1pcs
Rehearsal line:- 1pcs
Weak current switch line:- 1pcs
Display cable:- 1pcs
Screw M5*10:- 4pcs