What is the difference between active balancing and passive balancing — and why does 6A matter?

Passive balancers bleed off excess charge as heat, wasting energy. This active balancer transfers energy inductively from higher-voltage cells to lower-voltage cells, recovering that energy instead of wasting it. A 6A balance current means corrections happen much faster than typical 1A–2A passive boards, which is critical for large-capacity packs (60Ah–300Ah) where small imbalances can take hours to fix.

Is this balancer compatible with both LiFePO4 and Li-ion in the same 6S pack?

No — a single pack must use one chemistry throughout, as LiFePO4 (nominal ~3.2V/cell) and Li-ion (nominal ~3.6V/cell) have different voltage profiles. However, this board is compatible with LiFePO4, Li-ion, and LTO chemistries individually, so you can use it across different builds depending on your battery type.

Does this board replace a BMS, or does it work alongside one?

This is a balancer only — it does not provide overcharge protection, short-circuit protection, or discharge cutoff (except the 2.5V auto low-voltage shutdown per cell). It is designed to work alongside a dedicated BMS, not replace one. For a complete protection and balancing solution, pair this board with a compatible 6S BMS.

How do I connect this balancer to my 6S battery pack — what wiring is required?

The board connects to the balance tap wires of your 6S pack — typically a 7-wire harness (B-, C1, C2, C3, C4, C5, B+) matching the cell junction points. Ensure correct polarity on each tap before powering on, as reversed connections can damage the board. No external power supply is needed; the board draws operating power directly from the pack.

At what voltage difference between cells does the balancer activate, and how accurate is it?

The balancer activates automatically when it detects a voltage difference between cells and works to equalize them to within 10mV accuracy — a very tight tolerance that helps maintain consistent cell health over hundreds of cycles. There is no manual threshold to configure; the board operates continuously and autonomously while the pack is in use or at rest.

6S 6A Active Balancer Board for LiFePO4, Lithium, Li-ion & LTO Battery Packs

6S 6A Active Balancer Board for LiFePO4, Lithium, Li-ion & LTO Battery Packs

Name: 6S 6A Active Balancer Board for LiFePO4, Lithium, Li-ion & LTO Battery Packs
Brand: amiciKart
SKU: 1xBAL-6S-6A
Price: 899.00 INR
Availability: InStock

Quantity: (In cart: 0)

Increments of 1 Minimum of 1 Maximum of

Rs. 899.00 -41% Rs. 1,500.00 (MRP Inclusive of All Taxes)

Rs. 899.00

Chat on WhatsApp

Superfast Same-Day Shipping

30-Day Easy Returns

No questions asked return policy

1-Year Warranty

Comprehensive product warranty for peace of mind

Best Price Guarantee

Found it cheaper? We’ll match the price

Uneven cell voltages silently killing your battery pack? The 6S 6A Active Balancer Board is engineered to fix that — fast, precisely, and automatically — so your LiFePO4, Li-ion, or LTO pack delivers its full rated capacity every single time.

This high-performance active balancer uses inductive energy transfer to redistribute charge across all 6 cells with up to 6A balancing current and 10mV voltage accuracy — far superior to passive balancers that simply waste excess energy as heat. It supports cell voltages from 2.7V to 4.5V and automatically shuts off below 2.5V to protect your pack from deep discharge damage. Whether you're running a 60Ah home solar setup or a 300Ah EV powerwall, this board handles the load reliably across temperatures from -10°C to 60°C.

Designed for serious DIY builders, solar enthusiasts, RV owners, and EV hobbyists across India, this balancer is a drop-in upgrade for any 6S battery configuration. It works seamlessly with the three most popular battery chemistries — LiFePO4, Lithium-Ion, and LTO — making it a truly versatile component for multi-chemistry workshops and energy storage projects alike.

Backed by a 1-year warranty from amicikart, free shipping all over India, and same-day dispatch for orders before 2 PM — you can build with confidence. COD available. Easy 30-day returns. Pickup also available at our Noida store.

⚡ Restore Cell Balance Fast — 6A active balancing current corrects uneven voltages quickly, extending your battery pack's life and recovering lost backup time
🔋 Works with All Major Battery Chemistries — fully compatible with LiFePO4, Lithium-Ion, and LTO packs, making it a single versatile solution for diverse energy storage needs
🎯 Ultra-Precise 10mV Voltage Equalisation — maintains consistent cell voltages across all 6 cells, improving overall pack health, efficiency, and long-term stability
🛡️ Auto Low-Voltage Cutoff Protection — automatically shuts off below 2.5V (supports 2.7V–4.5V cells) to prevent deep discharge damage and safeguard your investment
☀️ Ideal for Large Banks (60Ah–300Ah) — purpose-built for solar off-grid systems, home powerwalls, RV batteries, EV packs, and DIY energy storage projects across India
🌡️ Reliable in All Conditions — operates safely from -10°C to 60°C, ensuring stable performance whether installed in rooftop solar setups or vehicle battery bays
✅ Buy with Confidence — backed by 1-year warranty from amicikart, 30-day no-questions-asked returns, COD available, and free shipping with same-day dispatch pan-India

Description

The amiciSolar 6S 6A Active Balancer ensures fast and precise voltage equalization for LiFePO4, Lithium Ion, and LTO battery packs. It delivers up to 6A balancing current with 10mV accuracy to correct uneven cell voltages, improve backup time, and extend battery life. Designed for 60Ah to 300Ah solar batteries, EV packs, and DIY powerwalls, it supports 2.7V to 4.5V cells with auto low voltage shutdown and low power consumption. Built for reliable performance in all conditions.

Recommendations

Product label: Sold out

Product label: Sold out

Product label: Sold out

Product label: Sold out

Product label: Sold out

Product label: Sold out

Product label: Sold out

Product label: Sold out

Your cart