140W USB-C Fast Charge/Discharge Module (2S–6S)

Received the board within mentioned time. Used heavily with 100w gan charger at 100w max input. I was able to charge laptop at 65, and I guess at 100w too.
One plus ultra fast charging 65w supported. Used 3s, 4s li-ion battery pack as input too. One thing as mentioned in description too, input voltage has to be higher to get almost same or lower output.

Using on regular basis, with 20v 100w gan charger as input n charging oneplus 65w charging expected to get a bit warmmm, but worth the price. With a type c to barrel adapter its like having multiple options to use this board.

Customer service is also plausible. Timely followup, on time calls and inquiry for doubts clearing and providing detailed insight. Feels good to have such after sales support.

Definitely recommend it.

It's a good one. However it's only a Charging Module. Input has to be between 6 and 30v. The 5.5x2.1mm connector on board gets hot if you are pulling 120w onwards. It gives 140w (20V @ 7A) non standard pd 3.0 and input source voltage has to be more than 22v and capable enough to give upto 8A current.
Do not expect 28V @ 5A pd3.1
You need to use genuine cables and devices that have ability to pull > 65w.
The description and specs are over hyped. They need to correct the discrepancies after proper homework and testing. The description and specs are copy paste from 2 different products without much thought. Buy only if you are having requirement, knowledge and devices that can support it. Non availability of such modules elsewhere in India online forced me to buy this module almost 2x times costlier than Europe/US/China.

You have presumed that I have received the item with delay at source and destination