Wireless DC 5V 8W Cordless Rechargeable Soldering Iron with Touch Sensor Function and USB Charging Cable With 5v Charger
- Cordless: - Rechargeable soldering iron is compact in size which makes soldering easy as there is no cord hanging at the end. In one single charge you can make use of it for 1 hour.
- Touch Sensor Function: - Once touch sensor is activated the soldering iron will stop heating as soon as the finger leaves the touch button.
- Battery Indicator: - There are 3 level battery indicators which show the battery life. Red indicator means 30% power, middle green indicator means 60% power and other green indicator means 100% power.
- Safety Indicator: - In case of short circuited tip, the red light will flash. Also in the beginning of usage the red light indicates that the heating is in process and after 12 mins green light flash means you can start soldering. (Note: - the product will not work when in charging mode).
- Package Include: - 1*Soldering Iron, 1*tip, 1*stand, 1*manual, 1*Solder Wire(180cm each).
Lithium battery: 3.7V 1800 mAH
Power equipment: 5V
Charging limit current 1.6A (full charge takes 1.5 to 2 hours)
Battery level indicator:
Red indicator light: 30% power;
Green indicator light 1 is on: 60% power;
Green indicator light 2 is on: 100% power;
During charging, the corresponding indicator light flashes. After the battery is fully charged, all three indicators are always on.
When the battery voltage is lower than 3V, the battery will be charged with a small current and the red indicator light will flash.
When the battery voltage is lower than 3V, it needs to be recharged.
NOTE The product does not work when charging
When the charging voltage is higher than 6V, it will stop charging, and the power indicator flashes red.
NOTE: - To activate Touch Sensor, press the power button three times, after this you will see red light flash which indicates that touch sensor is active. After this turn on the device by pressing power button for 3 sec.