amiciSmart AC 220V Digital LED Dual Thermometer Temperature Controller Thermostat Incubator Control Microcomputer Probe

MRP: 1,800.00
Price: 1,045.00
You Save: 755.00


  • This delicate digital display temperature controller can set start and stop temperature. The display and control temperature can be set to 0.1℃ with wide temperature control range from -50℃ to 110℃. It is convenient to install and wiring is simple. Widely used in the hatching area, equipment case, air conditioning system, temperature control protection and other fields.
  • ABS flame retardant housing is a virulent and environmental protective.
  • Wide temperature control range from -50℃ to 110℃. with accuracy of 0.1℃.
  • 1m waterproof probe is equipped for convenient usage.
Sale!

 1,800  1,045

  • This delicate digital display temperature controller can set start and stop temperature. The display and control temperature can be set to 0.1℃ with wide temperature control range from -50℃ to 110℃. It is convenient to install and wiring is simple. Widely used in the hatching area, equipment case, air conditioning system, temperature control protection and other fields.
  • ABS flame retardant housing is a virulent and environmental protective.
  • Wide temperature control range from -50℃ to 110℃. with accuracy of 0.1℃.
  • 1m waterproof probe is equipped for convenient usage.

76 in stock

SKU: 1xTHERMOSTAT-ADV-N Categories: ,

Description

Press twice “SET” board and right screen flashes, Press “UP” and “Down” Key board to adjust temperature, press right “UP” and “Down” board(any one) to preserve then exit.

Start and stop timing

Under the state of standby electric to press the “SET” once, start timing output ,screen alternately.

Press the “SET” Key board three seconds enter into the setting of control parameters.

Press ▲or ▼ key board choose adjust menu . then press SET key board once again to enter into the related state of control parameter setting, press ▲or ▼ key board to adjust parameters which requires modify. Press “SET” key board to exit after adjusted ,or exited from delayed 6 seconds system.

◆Cooling .heating mode setting

Press ”SET” key board less than 3 seconds ,enter into menu display, the code “HC” is displaying on screen, press “set” key board displayed working mode. Press”▲” or “▼”to adjust parameters .”C” means cooling mode ,”H” means heating mode.

◆Return difference function;

Maximum temperature was restricted with return difference between start up and close down.

◆Return difference setting.

Press ”SET” key board less than 3 seconds, enter into the menu display, press “▲” or “▼” key board to adjust code until screen displayed “D” code, press “SET” keyboard to displayed value of return difference. Press the “▲” and “▼” keyboard again to adjust parameters.

◆Temperature correction function

When there has deviations between measurement temperature and standard temperature. Machine measurement value and standard temperature can adjust to same under function of temperature correction. Temperature after correction=Temperature before correction +value of correction (Value of correction can be positive number ,negative number and zero)

◆Temperature correction setting.

Press ”SET” keyboard less than 3 seconds, enter into menu display, press “▲” or “▼” keyboard to adjust code until screen displayed “CA”, press ”SET” keyboard display temperature correction value, Press the “▲” and “▼” keyboard again to adjust parameters.

◆Delay protection function:

Press ”SET” Keyboard less than 3 minutes .enter into the menu display . press “▲” or “▼” keyboard to adjust code until screen displayed “PT”, Press “SET” keyboard displayed delay protection setting, Press the “▲” and “▼”keyboard again to adjust parameters.

◆Ultra-temperature alarm function

If measurement temperature ≥control temperature +AH alarm relay actuated , temperature controller alarming ,display screen alternated displaying “H” and present temperature. Then press anyone keyboards to stop alarming and turn off alarm relay output

 

◆Ultra-temperature alarm setting

Press “    SET” keyboard less than 3 seconds , enter into menu display, press “▲” or “▼” keyboard to adjust code until screen displayed “HS” .Press ‘SET” keyboard displayed the set value of ultra-temperature, press  “▲” or “▼”keyboard again to adjust parameters , Set up “HS as “0”,you can turn off the alarm function.

◆Ultralow temperature alarm function

measurement temperature < control temperature-LS alarm relay actuated ,

temperature controller alerting . Display screen alternated displaying “L ”and present temperature ,press anyone keyboard and turn off relay output.

◆Ultralow temperature alarm setting

Press “SET” keyboard less than 3 seconds ,enter into menu display, press “▲” or “▼” keyboard to adjust code until screen displayed “LS”, press ”SET” keyboard displayed the set value of ultralow temperature, press  “▲” or “▼” keyboard again to adjust parameters ,Set up “LS” as “0”,you can turn off the alarm function.

Status of the Indicator light introduction.

Green means working indicator light , green light long bright means state of cooling or heating. Red light flicking means delay to start up and it with function of setting. Red light long bright means in state of setting.

Press “SET” 3 seconds enter into system high ranking menu setting .During the progress of setting ,press “▲” or “▼” keyboard to choose menu which need to adjust. Then press “SET” keyboard once again enter into state of related controller parameters setting,,press “▲” or “▼” keyboard to adjust the controller parameters which need to modify, Exited by press ”SET” keyboard after adjustment. Temperature controller restart automatically.

Additional information

Warranty

Warranty Terms

Item Weight
Package Dimensions


Buy Now

Sponsored products related to this item


Leave a Reply

Your email address will not be published.




Copyright © 2019 Amicikart . All rights reserved

card-icon